Confined Space Rescue

AC Axial Fan w/ Ducting and Canister - Air Systems

$486.74 $486.74

The Contractor's series of ventilation products is the latest addition to Air Systems' ventilation product group. Known for product quality and performance, Air Systems offers a rugged portable polyethylene fan line designed to accommodate a variety of applications as well as demanding job site conditions at an economical price.

This kit includes both the AC Axial Fan (Model No. CVF-8AC) and the polyethylene canister with either 15' or 25' of 8 inch diameter ducting.

Industrial Saddle Vent - Air Systems

$194.70

The Saddle Vent takes up only 3 inches in a manhole opening and functions as a fresh air conduit to the workers in the confined space.

With the Saddle Vent in place, continuous ventilation is supplied to the workers by eliminating the need to remove the air duct each time a worker needs to enter or exit a confined space, increasing safety and productivity.

The Saddle Vent was developed by Air Systems and in use around the world for over 20 years to make it easier and safer for workers to enter and exit a confined space.

Product Specifications:

• Length: 43.5 inch
• Width: 14.5 inch
• Depth: 3.5 inch
• Top and Bottom Openings: 8 inch OD
• Construction: Polyethylene

Other Variants:

• Intrinsically Safe (SV-189CND)
• Pneumatically Powered Saddlator (SV-189-29)
• Ship Tank Sized (SV-189T)

90 Degree Elbow for top of Saddle Vent - Air Systems

$69.53

The 90 degree elbow is designed to connect securely and easily to the Air Systems Saddle Vent, reducing the chance that your ducting becomes pinched and blocked around the opening, which can restrict your air flow.

Also useful to prevent short-circuiting at the bottom of a space and to help to direct the splash exactly where needed.

Explosion Proof 90 Degree Elbow for top of Saddle Vent - Intrinsic, Air Systems

$118.21

The 90 Degree Elbow is designed to connect securely and easily to the Air System's Saddle Vent, reducing the chance that your ducting becomes pinched and blocked around the opening. Manufactured with built-in grounding lugs, the Explosion Proof 90 Degree Elbow, when used in conjunction with all of Air System's intrinsically safe products ensures that no risk of explosion exists during normal confined space work or during rescue operations.

SKEDCO Sked-Evac Tripod, 10 ft - Skedco

$2,163.28

The Sked-Evac Tripod extends to ten feet high at the three anchors which are available to clip into.

Each of the anchors is anodized red for easy identification, and all are equally well centred to handle a load.

The anchors, header and legs are interconnected with stainless steel bolts to provide maximum strength. The header limits the distance the legs can spread. When at the full extension this tripod allows you to bring the patient in a stretcher completely out of the hole.

It is rated to handle an NFPA rescue load and has EN795 certification as well.

Included with the tripod is a chain which passes through the feet to provide greater strength and stability. The chain will not degrade in acids or chemicals like nylon straps or ropes.

The legs are adjustable in 5" increments, and Skedco provides safe working load data for each tripod height on each tripod.

Measurement:

When Sked-Evac Tripod is fully extended, the length of each tripod leg is 135 3/4″ long (11′ 3 3/4″). And the Diameter is about 108” (9’).

Shipping Dimensions:

9" x 9" x 90" at 70lbs

Product Manual Download:

https://skedco.com/wp-content/uploads/2015/02/Tripod-Instruction.pdf

Brackets are available for mounting most popular winches.

Made in USA.

Disclaimer: Skedco strongly recommends against attaching “change of direction” pulleys to the feet or legs of the Sked-Evac or any other tripod as pulling laterally against unsecured tripod legs is dangerous and could lead to injury or death.

SKEDCO Sked-Evac Tripod Storage Bag - Skedco

$141.61

Vinyl transport bag for storing and carrying your SKED-EVAC Tripod (SK-700). Features heavy duty vinyl coated nylon material and an extra long zipper along it's full length and across it's ends to facilitate easy repackaging. It has a pocket inside in the center to store the bag of chain which comes with the tripod, preventing the chain from sliding to one end when the tripod is carried. There are handles in the center and on each end of the bag. This bag has a 9"" diameter and a 7'1" length, and will make nearly any brand of tripod easier to carry. Made in USA.

TerrAdaptor Tripod System - SMC

$6,123.87

The TerrAdaptor system has been tested extensively in both lab and field environments. As a result, the TerrAdaptor Portable Anchor system in the standard symmetric tripod and quadpod configurations are the only systems of their kind to be certified by UL to NFPA 1983 (2006 ed.) Symmetric Tripods are typically used for straight vertical access such as above manholes or access hatches. When straddling a manhole or access hatch, a symmetric tripodÌÎ_ÌÎ_큉ۡÌÝÌÒ?ÌÎ__ÌÎ_?ÌÎ_ÌÎÌà_ÌÎ_̴ÌàÌÎ_?́s feet are equal distance from the center of the manhole or hatch. All three legs are equally loaded. This is most often the strongest tripod configuration. The TerrAdaptor Tripod System includes: TerrAdaptor Tripod Head; 2 Offset Leg Clamps with 3 Load Locking Pins each; Main Attachment Pin; 3 Legs Kits complete with Feet, Hobble Plates & Baskets; Center Leg Clamp with 3 Load Locking Pins each; 3 Rope Hobble Sections; Cotter Pin Kit; Leg Coupling Pin; 2 Lash Ring with 1 Coupling Pin each; TerrAdaptor Head/ Accessory Bag; 2 TerrAdaptor Leg Bag; TerrAdaptor User Guide. MBS: 36 kN (8,093 lbf).

MACK Supplied Air Regulator/Manifold - NFPA, Air Systems

$3,610.26

The MACK-NFPA series has been developed specifically for the Fire/Rescue teams working under NFPA guidelines.

The NFPA version of the MACK unit comes in two standard models, the MACK-NFPA1 and MACK-NFPA3.

Each model has two separate regulator/manifold systems. Two SCBA connect whips are provided for each regulator. In the event of a regulator malfunction, rescue can be performed on the standby/backup regulator system.

The basic unit described above, Model MACK-NFPA1, can have a regulator isolation valve added to allow one or both air sources to be used simultaneously; this addition forms the Model MACK-NFPA3 which has a CGA-347 high-pressure inlet included.

Wrap Evac Harness

Sold Out - $1,737.54

The Wrap Evac harness allows you to completely secure your patient, even in extremely small and restricted spaces. A sliding head harness easily adjusts to different body sizes, allowing for cervical immobilization. Extremely versatile, the harness can even be used without the backboard for confined space rescue in vertical or horizontal configurations.

Key Features:

• Sliding head harness
• Removable backboard
• Heavyweight handles for carrying
• 4 quick connect straps
• Adjustable harness straps
• Detachable skid plate
• Canadian manufactured

Explosion Proof AC Axial Fan w/ Ducting and Canister - Intrinsic, Air Systems

$2,460.40

The Contractor's series of ventilation products is the latest addition to Air Systems' ventilation product group. Known for product quality and performance, Air Systems offers a rugged portable polyethylene fan line designed to accommodate a variety of applications as well as demanding job site conditions at an economical price. This kit includes both the AC Axial Fan (Model No. CVF-8EXP) and the polyethylene canister with 15' or 25' of 8 inch diameter ducting. The Explosion Proof version also includes a continuous wire connecting inside the ducting and grounding lugs on the canister and fan to ensure a 100% intrinsically safe system.

Multi-Gas Clip with Pump

$1,539.68

A New Option in Portable Gas Detection

Twice a day, every day that's how often you have to charge most portable gas detectors, until now. Introducing the Multi Gas Clip Pump (MGC Pump) from Gas Clip Technologies, the only portable multi gas detector with an internal sampling pump that can go an entire work week without a charge.

The Secret to a Long Life

Like the other MGC units, the MGC Pump uses low-power photometric technology to detect combustible gases (LEL) rather than age-old pellistor technology. The MGC Pump uses an IR source which conserves power and helps the battery last and last.

Ergonomic Design Makes for a Good Fit

The MGC Pump is also designed for comfort. The reduced, sloping shape of the holding area at the bottom of the instrument makes the MGC Pump a comfortable fit in the hands of your workers. It is fully submersible and simple to operate. The MGC Pump offers a one button design and the largest LCD screen in the industry so it's easy to read.

Calibrate the MGC Pump Once Every 6 Months

Other multi gas detectors require calibration anywhere from 1 to 3 months. The MGC Pump can go 6 months without being calibrated.This is an added benefit of IR sensing technology because IR is immune to pellistor sensor poisons such as silicone or H2S.

Key Features:

• 5 day battery life (continuous run time)
• 6 month calibration cycle
• Will work in inert environments, no need for oxygen
• Pull from over 75 feet
• Stainless steel inlet
• CSA Certified

Petzl Volt Wind Harness

$569.66

The Volt is a fall arrest and work positioning harness that is very easily donned thanks to its EASYFIT design: a vest ensures the harness keeps its shape and the FAST automatic buckles on the waistbelt and leg loops allow the harness to be donned with both feet on the ground. The VOLT harness' anatomical design and wide, semi-rigid waistbelt ensure comfort throughout the work day.

For vertical progression with a rail or cable-based fall protection system, the LADDER CLIMB attachment point allows for ventral attachment of the trolley: it distributes the load on the waistbelt and thus ensures optimal efficiency and comfort during progression. In case of a fall, this attachment point automatically moves upward to a sternal position to ensure a vertical post-fall body position.

The VOLT WIND harness' anatomical design and wide, semi-rigid waistbelt ensure comfort throughout the work day. It has wear protectors on the waistbelt and below the dorsal point to limit wear when moving about inside the wind turbine tower.

Wide, semi-rigid waistbelt for excellent support, with lightweight, breathable construction for optimal comfort.	Stowage system for the MGO connectors on fall arrest lanyards, on each shoulder strap. In case of a fall, this system releases the MGO connectors and allows the absorber to be deployed.	Fall indicators on the sternal and dorsal attachment points. Their activation after a fall indicates that the harness must be retired.

The VOLT WIND harness also has dorsal wear protectors, to reduce wear on the straps when moving about inside a wind turbine tower.

Key Features:

Rapid donning thanks to the EASYFIT design:

- vest ensures the harness keeps its shape
- FAST automatic buckles on the waistbelt and leg loops allow the harness to be very easily donned, with both feet on the ground. These buckles retain their adjustment settings between donnings

Comfortable throughout the work day :

- anatomical design is close-fitting, while giving optimal freedom of movement.
- lightweight, breathable construction
- wide, semi-rigid waistbelt for excellent support
- for vertical progression with a rail or cable-based fall protection system, the LADDER CLIMB attachment point allows for ventral attachment of the trolley: it distributes the load on the waistbelt and thus ensures optimal efficiency and comfort during progression. In case of a fall, this attachment point automatically moves upward to a sternal position to ensure a vertical post-fall body position
- leg loop foam position can be adjusted for perfect positioning
- side slots allow a seat to be installed for greater comfort in prolonged suspension

Easy to use:

-waistbelt and shoulder straps equipped with self-locking DoubleBack buckles for quick and easy adjustment
-side attachment points can be folded down to prevent them snagging accidentally when not in use
-stowage system for the MGO connectors on fall arrest lanyards, on each shoulder strap.
-In case of a fall, this system releases the MGO connectors and allows the absorber to be deployed
-fall indicators on the sternal and dorsal attachment points If a fall indicator is visible after a fall, the harness must be retired
- equipment loops, slots for CARITOOL tool holder and TOOLBAG tool pouch allows easy organization of work tools

Multiple Attachment Points:

-LADDER CLIMB attachment point: for attaching the trolley of a rail or cable-based fall protection system
-Side attachment points: for attaching a positioning lanyard for use in double mode
-Sternal attachment point: for attaching a fall arrest system
-Dorsal attachment point: for attaching a fall arrest system
-Rear waistbelt attachment point: for attaching a restraint lanyard

Wind-Power Specific Design

-Dorsal wear protectors prevent wear on the straps when moving within tight spaces such as those found inside a wind turbine tower.

Specifications:

Certification(s): CE EN 361, CE EN 358, EAC, ANSI Z359.11, CSA Z259.10

Material(s): nylon, polyester, aluminum, steel

Guarantee: 3 years

Volt

The Volt harness comes in two configurations, one directed specifically at the wind-power industry. For more information on the Volt, follow this link:

http://www.dynamicrescue.com/products/petzl-volt-harness

Basic SKED Stretcher System w/ Cobra Buckles - Orange, Skedco

$1,053.40

The original and still the best solution for confined space, high angle or technical rescue, and traditional land based applications, the Sked stretcher is a revolutionary design which provides outstanding patient protection and security.

Skedco now has the Austrian made Skedco/Cobra side release buckles that are dependable and strong enough to meet the needs of securing a patient into a Sked stretcher without the danger of breakage. These buckles are rated at 3,000 pounds. They are durable and easy to use. When they are under tension they are very hard to release thus accidental release under tension is not an issue. With these buckles, you will no longer have to weave the webbing through the original steel buckles when packaging a patient. Patient packaging is often done in about half of the time as when using the original steel buckles.

The Sked comes equipped for horizontal hoisting by helicopter or vertical hoisting in caves or industrial confined spaces. When the patient is packaged the stretcher becomes rigid. The durable plastic provides protection for the patient while allowing extrication through the most demanding confined spaces.

The SK-200 Sked Basic Rescue System comes with:

• SK-201C-OR The Sked Stretcher with Cobra Buckles
• SK-202 Cordura backpack
• SK-203 Horizontal Lift Slings (pair)
• SK-204 Sked Tow Strap
• SK-205 Removable Webbing Handles
• SK-206 Steel Locking 'D' Carabiner
• SK-207 Sked Vertical Lift Sling

The stretcher is rolled for storage in a tough Cordura backpack which is included with the system. The Sked storage bag is 36 inches (91 cm) long by 9 inches (23 cm) in diameter and ships at 18 lbs, complete for most applications.

Available in International Orange or Olive Drab Green.

NSN Number (SK-200C-OR):

6530-01-575-4004

User Manual Download:

https://skedco.com/wp-content/uploads/2016/10/NEW-SKED-INSTRUCTION-Standard-Size.pdf

Pre-Packaged 4:1 MA Kit - Dynamic Rescue

Sold Out - $1,301.48

Dynamic Rescue not only prides itself on knowing about rescue gear but about knowing the best gear to use in every scenario. Through decades of work in industry and in Fire Rescue, we have consistently found that one of the biggest challenges facing workers and rescuers is dealing with equipment once it has arrived on site. Too often gear that is purchased stays neatly wrapped in the box, and no one is quite sure how to use it. We solve this problem for you by providing pre-rigged kits, with exactly the gear needed, nothing more, nothing less, and operationally deployable. That means when your equipment arrives, all you have to do is take it out of the box and you're ready to go. Everything is already in place, cut, tied, labeled, and documented. Why make work or rescue any harder than it needs to be?

This kit includes the following equipment:

- 1 x 12.5 mm Static Kernmantle rope, Orange, 300' [New England],

- 1 x 8 mm Prusik cords, 5' [New England],

- 4 x Vulcan Screw-lock Carabiners [Petzl],

- 2 x Double Prusik Minding Pulleys, 3 inch [SMC],

- 1 x Single Prusik Minding Pulleys, 3 inch [SMC],

- 1 x Omni Sling, 10' [RSI],

- 1 x Vari-Rigger Anchor Strap [PMI],

- 1 x Deluxe Rope Pack, Orange [PMI].

This kit also includes all documentation you could need to deploy the gear including a customized rope log, an inventory reference card, rope manufacturing information as well as rope and cordage specification cards.

Included in the price are customized rope labels and documentation cards. Just include a note specifying your desired rope numbers and we'll handle the rest.

*For additional options and customization, please contact us directly at Sales@DynamicRescue.com

VERTEX Helmet - CSA, ANSI, Petzl

$154.09

Comfortable helmet for work at height and rescue

Pre-Packaged Communications Kit, 2 Rescuer - Dynamic Rescue

Sold Out - $5,045.68

Dynamic Rescue not only prides itself on knowing about rescue gear but about knowing which gear to use in which scenario. Through decades of work in industry and in Fire Rescue, we have found that consistently one of the biggest challenges facing workers and rescuers is dealing with equipment once it has arrived on site.

Too often gear that is purchased stays neatly wrapped in the box, and no one is quite sure how to use it. We solve this problem for you by providing pre-rigged kits, with exactly the gear needed, nothing more, nothing less, and operationally deployable. That means when your equipment arrives, all you have to do is take it out of the box and you're ready to go. Why make work or rescue any harder than it needs to be?

This kit includes the following equipment:

• 1 x Hard Case [Pelican]
• 1 x Operator Headset with Mic [Con Space]
• 1 x 25' Operator Communication Line, with connectors [Con Space]
• 2 x 125' Entrant Communication Line, with connectors [Con Space]
• 2 x Entrant Headsets [Con Space]
• 2 x Entrant Throat Mics [Con Space]
• 1 x CSI-1100 Communication Control Module [Con Space]
• 1 x Cable Splitter [Con Space]
• 1 x Micro Hardcase 1060 [Pelican]
• 1 x Screw Driver [Jet]
• 8 x Spare AA Batteries

*For additional options and customization, please contact us directly at Sales@DynamicRescue.com

Pre-Packaged Communications Kit, 4 Rescuer - Dynamic Rescue

Sold Out - $11,265.31

Dynamic Rescue not only prides itself on knowing about rescue gear but about knowing which gear to use in which scenario. Through decades of work in industry and in Fire Rescue, we have found that consistently one of the biggest challenges facing workers and rescuers is dealing with equipment once it has arrived on site.

Too often gear that is purchased stays neatly wrapped in the box, and no one is quite sure how to use it. We solve this problem for you by providing pre-rigged kits, with exactly the gear needed, nothing more, nothing less, and operationally deployable. That means when your equipment arrives, all you have to do is take it out of the box and you're ready to go. Why make work or rescue any harder than it needs to be?

This kit includes the following equipment:

• 1 x Hard Case [Pelican]
• 1 x Operator Headset with Mic [Con Space]
• 2 x Operator Communication Line, with mic mute, 1' and 20' [Con Space]
• 4 x 125' Entrant Communication Line, with connectors [Con Space]
• 4 x Entrant Headsets [Con Space]
• 4 x Entrant Throat Mics [Con Space]
• 1 x CSI-2100 Communication Command Module [Con Space]
• 1 x Double Cable Splitter with Mic Mute [Con Space]
• 1 x 50' Communication Line with connectors [Con Space]
• 1 x Power Talk Box [Con Space]
• 1 x Micro Hardcase 1060 [Pelican]
• 1 x Screw Driver [Jet]
• 8 x Spare AA Batteries

*For additional options and customization, please contact us directly at Sales@DynamicRescue.com