SMC
1 in. Brake Bar, Stainless Steel, Straight Slot - SMC
$27.47
Straight slot bar of 1 inch tubular stainless steel to be added to a brake bar frame to create a descent rack. Key features: Brake...
View full product details
1.2 in. JR Double Pulley - SMC
$47.18
The JR and JRB pulleys are double pulleys with a max rope diameter for of 9 mm. Key Features: Nylon sheave Precision machined aluminum side...
View full product details
1.2 in. TR Single Pulley - SMC
$54.38
The TR Pulley is strong, reliable compact, and lightweight. It is reasonably priced but doesn't sacrifice efficiency. Great performance for its size and cost. The...
View full product details
2 in. Swiftwater Pulley, Aluminum - SMC
$66.70
Noting the unique requirements found in Swift Water Rescue, we created an entirely new pulley to address those needs. The Swiftwater Rescue Pulley represents a reasonably priced, non-NFPA alternative to other midsized pulleys.
Made using high quality aluminum, this lightweight pulley weighs 6 oz. and features a 2‰۪‰۪ sheave. Anodized side plates feature a series of holes that help to minimize the hydroplaning effect that might occur with a typical pulley. These side plates are also configured to work as a Prusik Minding Pulley and are precisely tensioned for easy one-handed operation and secure placement at any point along the rope.
High quality sealed ball bearings help to provide the optimal efficiency that is so crucial in rope rescue systems. They help to reduce the performance-robbing resistance that is inherent in most multiple component systems and are not prone to failure under misaligned loads or with twisted gear that may occur with needle bearings.
The wide and flat base maximizes the effectiveness of a Prusik hitch while a unique side plate formation allows the use of larger ropes in a compact pulley. The top hole accepts 2 large rescue carabiners or multiple small carabiners and allows the carabiners to be rotated freely and completely even while closed.
-
- Lightweight aluminum
- 2" Aluminum sheave
- Sealed bearings
- Accepts ropes up to 1/2"
-
- Colour: Red
- Type: Single Pulley
- MBS: 34 kN (7786 lbf)
- Weight: 6.0 oz (170 g)
- Length: 4.00" (10.2 cm)
- Width: 3.00" (7.6 cm)
- Height: 1.37" (3.5 cm)
- Axle: Ball Bearing
- Sheave: 2.00" Aluminum
- Max Rope Size: 13 mm
- Material: Aluminum
- Certification: UIAA
3 in. Double Prusik Minding Pulley - NFPA, SMC
$204.45
The unique shape of SMC's aluminum side plates allows the efficient use of prusik hitches as a belay or progress capture device. Constructed with a 3-inch diameter sheave running on a high-efficiency ball bearing. Low profile fasteners help eliminate the possibility of the pulley snagging. Pulley will accommodate up to 13 mm rope.
-
- UL certified to NFPA 1983 (G)
- High efficiency sealed ball bearings providing flawless function under conditions that would shut down lesser grade pulleys.
- Side plates are precisely tensioned for easy one-handed operation and secure placement at any point along the rope.
- Oversized top hole is designed for use with up to 2 rescue carabiners and is large enough to allow sleeve of locked carabiner to pass through.
- Low profile fasteners reduce snagging and hanging up when pulley is being moved.
- Wide base design works most efficiently with Prusik cords of up to 8mm.
- Made in the USA.
-
- Colour: Gold/Grey
- Type: Double Pulley
- MBS: 48 kN (10790 lbf)
- Weight: 1 lbs 4.8 oz (590 g)
- Length: 7.10" (18.0 cm)
- Width: 4.17" (10.6 cm)
- Height: 2.20" (5.6 cm)
- Becket Strength: 30 kN
- Axle: Ball Bearing
- Sheave: 2.97" Aluminum
- Tread: 2.46"
- Max Rope Size: 13 mm
- Material: Aluminum
View full product details
3 in. Single Prusik Minding Pulley - NFPA, SMC
$137.75
The unique shape of SMC's aluminum side plates allow the efficient use of prusik hitches as a belay or progress capture device. Constructed with a 3-inch diameter sheave running on a high-efficiency ball bearing. Low profile fasteners help eliminate the possibility of the pulley snagging. Pulley will accommodate up to 13 mm rope.
-
- Designed for 11 mm to 13 mm ropes
- UL certified to NFPA 1983 “G” General Use.
- High efficiency sealed ball bearings providing flawless function under conditions that would shut down lesser grade pulleys.
- Side plates are precisely tensioned for easy one-handed operation and secure placement at any point along the rope.
- Oversized top hole is designed for use with up to 2 rescue carabiners and is large enough to allow sleeve of locked carabiner to pass through.
- Low profile fasteners reduce snagging and hanging up when pulley is being moved.
- Wide base design works most efficiently with Prusik cords of up to 8mm.
- Made in the USA
-
- Color: Red
- Type: Single Pulley
- MBS: 38 kN (8542 lbf)
- Weight: 12.5 oz (354 g)
- Length: 5.85" (14.9 cm)
- Width: 4.17" (10.6 cm)
- Height: 1.38" (3.5 cm)
- Axle: Ball Bearing
- Sheave: 2.97" Aluminum
- Tread: 2.46"
- Max Rope Size: 13 mm
- Material: Aluminum
3/4 in. Brake Bar, Stainless Steel - SMC
$18.13
Angled slot brake bars formed in a "U" shape. Stainless steel bars will not leave aluminum streaks on your rope and will last longer than...
View full product details
3/4 in. Brake Bar, w/ Training Groove, S.S. - SMC
$18.13
Angled slot brake bars formed in a "U" shape. Stainless steel bars will not leave aluminum streaks on your rope and will last longer than...
View full product details
4 Bar 'U' Rack - SMC
$50.75
Type #304 stainless steel construction, with a welded eye for extra strength. Each eye weld is inspected for dye penetration before shipping. Average tensile of...
View full product details
7/8 in. Brake Bar, Anodized, w/ Angled Slot - SMC
$14.87
Solid aluminum gives these bars maximum friction and good wear characteristics. Lighter than the stainless bars and available in a straight slot configuration. 7/8" diameter...
View full product details
7/8 in. Brake Bar, w/ Groove, Anodized - SMC
$17.03
Solid aluminum gives these bars maximum friction and good wear characteristics. Lighter than the stainless bars and available in a straight slot configuration. 7/8" diameter...
View full product details
7/8 in. Top Brake Bar, Angle Slot, Solid Aluminum - Red, SMC
$17.03
7/8" diameter aluminum bar for one of your first or top bars. The extra mass acts as a heat sink and the training groove helps...
View full product details
7/8 in. Top Brake Bar, Stainless Steel - SMC
$85.55
The 7/8 inch top bar is designed to stay on your rack and virtually last forever. Has machined groove to keep the rope centered. Core...
View full product details
Aluminum Descending Ring - SMC
$5.08
This inexpensive aluminum ring is intended to be left at the top of a rappel in place of a carabiner to facilitate rope recovery. More...
View full product details
Auto-Locking Lite Steel Carabiner - NFPA, SMC
$55.49
A lite alloy steel carabiner featuring double or triple action gates. Easily opened with one hand, but once released, the gate closes to a fully...
View full product details
Captive Eye Carabiner Clip - SMC
$4.46
Turn any SMC carabiner into a Captive Eye carabiner. Made from strong stainless steel, the SMC Captive Eye Wire Keeper, when installed correctly will hold...
View full product details