Tango TX1 Gas Detector [Industrial Scientific]

The Tango® TX1, with a 2-year run time and DualSense® Technology, increases worker safety, regardless of bump test frequency, while reducing overall costs.

• DualSense Technology  increases worker safety by using two 
  sensors to detect the same gas
• Guaranteed for Life™ with replaceable sensors and batteries that 
  extend the life of the instrument 
  
• Optional AlarmAmp™ increases audible alarms to 110dB
• Acknowledgeable gas alerts

• Detailed Description
• Specifications

• By wearing the Tango® TX1 Portable gas detector, your workers will be the safest single gas monitor users in the world. A 2-year run time and patented DualSense Technology increase worker safety, regardless of bump test frequency, while reducing overall costs. 
  
   

  • Significantly increases worker safety - DualSense Technology ensures that, regardless of your current bump test policy, you will be significantly safer with the Tango than with any other single gas instrument on the market today. ^*  
  • Longer battery life - Operates continuously in an "always-on" mode for two years. After the battery can no longer support instrument life, it can be replaced for another two years of continuous operation.
  • Louder instrument alarm - Alarms at 100dB at 10 centimeters making it twice the volume of Industrial Scientific's GasBadge units and louder than any single gas instrument on the market. Alarm volume can be increased by about 10dB for higher-noise environments with the addition of the optional AlarmAmp™.
   

  ^{*Based on iNet® data including more than 2 million bump tests and 100,000 unique sensors.} 

• SPECIFICATIONS

  INSTRUMENT WARRANTY: Guaranteed for Life™. Warranted for as long as the instrument is supported by Industrial Scientific Corporation (excludes sensors, batteries, and filters). CO and H2S sensors are warranted for 3 years. All other sensors are warranted for 2 years.

  DISPLAY: Segment liquid crystal display (LCD)

  KEYPAD: Two buttons

  CASE MATERIALS: Case top: Polycarbonate with a protective rubber overmold Case bottom: Conductive polycarbonate

  ALARMS: Three strobe-emitting visual alarm LEDs (two red; one blue); 100 decibel (dB) audible alarm at a distance of 10 cm (3.94"); Vibration alarm

  DIMENSIONS: 99 x 51 x 35 mm (3.9" x 2.0" x 1.4")

  WEIGHT: 126.0 g (4.4 oz.)

  TEMPERATURE RANGE: -40°C to +50°C (-40°F to +122°F)

  HUMIDITY RANGE: 15%-95% Non-condensing (continuous)

  SENSORS: CO, CO/H2, H2S, NO2, SO2 - Electrochemical sensor technology

  SENSOR MEASURING RANGES: Carbon Monoxide (CO): 1 to 1,000 ppm in 1 ppm increments Carbon Monoxide (CO/H2 low): 0.0 to 1,000.0 ppm in 1 ppm increments Hydrogen Sulfide (H2S): 0.0 to 500.0 ppm in 0.1 ppm increments Nitrogen Dioxide (NO2): 0.0 to 150.0 ppm in 0.1 ppm increments Sulfur Dioxide (SO2): 0.0 to 150.0 ppm in 0.1 ppm increments

  BATTERY: 3.6 V Primary lithium-thionyl chloride (Li-SOCl2); 1.5AH, 2/3AA; replaceable;  non rechargeable; always on; up to 2-year run time depending on operating conditions

  DATA LOGGING: 3 months at 10-second intervals

  EVENT LOGGING: 60 alarm events

  CERTIFICATIONS

  INGRESS PROTECTION: IP66; IP67

  -40°C TO +50°C (-40°F TO +122°F) ATEX Ex ia I Ma; Ex ia IIC T4 Ga; Equipment Group and Category: I M1 and II 1G CSA Class I, Groups A B C D T4; Ex ia IIC T4 IECEx Ex ia I Ma; Ex ia IIC T4 Ga UL (C-US) Class I, Groups A B C D T4; Class II, Groups E F G; Class I, Zone 0, AEx ia IIC T4 INMETRO Ex ia I Ma; Ex ia IIC T4 Ga -20°C TO +50°C (-4°F TO +122°F) China Ex Ex ia IIC T4 Ga CMA Ex ia I Ma; H2S, CO KC Ex ia IIC T4 EAC PO Ex ia I X; 0 Ex iX IIC T4 X

   

    

  These specifications are based on performance averages and may vary by instrument.