Connectors

AM'D Carabiner - Petzl

$24.47

The shape and size of this carabiner makes it great for most uses, from connecting a belay device to your harness or as a connector at the end of a lanyard. The D-shape makes it one of the strongest and lightest locking carabiners Petzl makes. Perfectly suited for use with belay devices due to its symmetric shape on both ends of the carabiner. In addition, the D-shape has the highest strength-to-weight ratio of all Petzl carabiner designs. This carabiner comes with Petzl's Keylock system.

Available with manual locking (SCREW-LOCK) gate or auto-locking systems (BALL-LOCK, TRIACT-LOCK).

Material: aluminum

Certifications: CE EN 362, CE EN 12275, type K (K and B for M34 SL), UIAA

Auto-Locking Lite Steel Carabiner - NFPA, SMC

$55.49

A lite alloy steel carabiner featuring double or triple action gates. Easily opened with one hand, but once released, the gate closes to a fully locked position. The carabiner gate and sleeve are stainless steel for problem-free operation. An offset inchD inch shape provides a smooth transfer of the Munter hitch when used as a belay and has ample volume to clip in large diameter ropes and over the rails of most litters.

Crossover Carabiner - NFPA, ANSI, SMC

$49.61

The SMC CrossOver series aluminum carabiners are the first biner to meet both NFPA G-rating 1983 and ANSI Z359.1 strength requirements. These carabiners feature a new ergonomic single hand frame geometry allowing easy single hand operations. The CrossOvers have been specifically designed to meet all your work environment safety needs. Easy to use Dual or Triple Auto-Locking sleeves allow for single hand operations while working in mission critical environments. A traditional non-ANSI Screw-Lock version is also available.

DELTA 8 Screw Link - Petzl

$14.45

DELTA Triangular steel quick link. When closed with a wrench, it becomes a semi-permanent anchor ring.

DELTA Screw Link - Petzl, 10 mm

$15.95

DELTA Triangular steel quick link. When closed with a wrench, it becomes a semi-permanent anchor ring.

Delta Screw Link - PMI

$35.12

Screw links stand up to multi-directional forces better than carabiners and allow ample room for multiple pieces of gear to be attached. Ideal harness attachment in ascending systems or for joining anchor straps. Note: Links are stamped with a Working Load Limit (WLL) that is about 1/5 of its rated breaking strength.

FP Lite Steel Carabiner - ANSI, SMC

$45.23

The SMC FP Lite Allow has been specifically designed for all your fall protection needs. Built from the ground up giving you the best of the best in carabiner functionality, the FP features an easy opening Auo-Locking gate. You don't have to sacrifice strength for weight when working at height all day long.

Half-Moon Screw Link - PMI, Galvanized Steel, 9.5 mm

$25.25

Screw links stand up to multi-directional forces better than carabiners and allow ample room for multiple pieces of gear to be attached. Ideal harness attachment in ascending systems or for joining anchor straps. Note: Links are stamped with a Working Load Limit (WLL) that is about 1/5 of its rated breaking strength.

HMS Jake Carabiner - CMC

$26.02 $25.87

Designed to make belaying single-person loads with a Munter hitch easier and more efficient, these large, pear-shaped aluminum carabiners are available in Screw-Lok, Two-Stage Quik-Lok, and Three-Stage Quik-Lok models. The gate opening is 1 in (25 mm).

Every carabiner is proof loaded to an MBS of 23 kN (5,170 lbf).

Kinetic Carabiner - SMC

$29.03

The SMC Kinetic Series has been specifically designed to meet all your personal protection requirements. Built from the ground up this carabiner gives you the best of the best in carabiner functionality. Extremely lightweight, you don't have to sacrifice strength for weight when working at height all day long.

Large Locking D Aluminum Carabiner - SMC

$54.68

Specially designed for rescue work, the large inchD inch fits easily over litter rails and has the strength to hold up to any job

Large Steel Locking D Carabiner - NFPA, SMC

$58.05

Large size locking carabiners developed by SMC especially for the needs of the fire and rescue communities. Available in several different metal finishes, as well as in both NFPA (Class G) and non-NFPA versions. Black zinc coated models are ideal for tactical operations while the stainless steel model is best for corrosive environments. The large gate opening fits easily over litter rails and all models have stainless gates and locking sleeves for greater strength and reliability.

Large Steel Locking D Carabiner - SMC

Sold Out - $63.45

Large size locking carabiners developed by SMC especially for the needs of the fire and rescue communities. Available in several different metal finishes, as well as in both NFPA (Class G) and non-NFPA versions. Black zinc coated models are ideal for tactical operations while the stainless steel model is best for corrosive environments. The large gate opening fits easily over litter rails and all models have stainless gates and locking sleeves for greater strength and reliability.

Large Steel Safety Locking D Carabiner - SMC

$76.95

The SMC ANSI Saftey Lock is manufactured using High Strength Zinc Plated Alloy Steel to maximize the strength to weight ratio and is ideal for an situation where security is critical. Locking the sleeve on the gate rather than the body of the carabiner provides greater overal strength and smooth action.

Light D Non-Locking Aluminum Carabiner - SMC

$15.05

For an easy clip, the Light D has a sleek low profile nose for that quick capture.

Lite Steel Carabiner - NFPA, SMC

$54.68

SMC Lite Steel locking carabiners are for those situations where the high strength and durability of SMC Steel Carabiners is desired but the size and weight is not. Increasingly popular among cave and mounatin rescuers for providing most of the benefits without the weight and bulk typically associated with steel biners.

Lite Steel Carabiner - SMC

Sold Out - $69.53

SMC Lite Steel locking carabiners are for those situations where the high strength and durability of SMC Steel Carabiners is desired but the size and weight is not. Increasingly popular among cave and mounatin rescuers for providing most of the benefits without the weight and bulk typically associated with steel biners.

Locking D Aluminum Carabiner - NFPA, SMC

$27.41

This carabiner sets the standard in climbing, mountaineering and rescue applications. Extremely lightweight, it offers high strength and a large gate opening for functional versatility. The locking sleeve engages the gate rather than the frame to prevent jamming.

Locking D Aluminum Carabiner - SMC

Sold Out - $24.23

This carabiner sets the standard in climbing, mountaineering and rescue applications. Extremely lightweight, it offers high strength and a large gate opening for functional versatility. The locking sleeve engages the gate rather than the frame to prevent jamming.

Mountain D Non-Locking Aluminum Carabiner - SMC

Sold Out - $19.58 $18.93

This easy handling carabiner is a must for all around use. Large enough to organize and manage your rigging.

Oval Non-Locking Aluminum Carabiner - SMC

Sold Out - $11.14

Keep your gear in order with the traditional SMC Oval. A traditional biner, an excellent choice.

Oval Screw Link - PMI

$15.80

Screw links stand up to multi-directional forces better than carabiners and allow ample room for multiple pieces of gear to be attached. Ideal harness attachment in ascending systems or for joining anchor straps. Note: Links are stamped with a Working Load Limit (WLL) that is about 1/5 of its rated breaking strength.

ProSeries Key-Lock Carabiner - Aluminum, CMC

$65.25

The Most Advanced General-Use Rescue Carabiner on the Market. Rescuers working in the most demanding circumstances will appreciate our ProSeries Aluminum Carabiners, the first aluminum carabiners to meet NFPA strength requirements for general use. Combining high performance with minimum weight, these carabiners significantly reduce the weight of a rescuer's gear while maintaining the highest possible margin of safety. The patented key-lock design eliminates snagging when removing the carabiner from your harness, and a redesigned gate provides a full 1.1 inch (28 mm) opening on the standard size version and a 2.1 inch (53 mm) opening on the XL version. Gate choices include the traditional Screw-Lock, our easy-to-open-with-one-hand Auto-Lock and our innovative Manual-Lock. Both of the XL carabiners have a removable keeper pin. Every carabiner is proof loaded.

ProSeries Key-Lock XL Carabiner - Aluminum, CMC

$95.70 $94.03

The Most Advanced General-Use XL Carabiner on the Market. Rescuers working in the most demanding circumstances will appreciate our ProSeries XL Aluminum Ladder Hook Carabiners, the first aluminum carabiners to meet NFPA strength requirements for General Use. Combining high performance with minimum weight, these XL-sized specialty carabiners significantly reduce the weight of a rescuer's gear while maintaining the highest possible margin of safety. The patent pending key-lock design eliminates snagging when removing the carabiner from your harness or ladder belt, and the XL size provides a full 2.1-in. (53-mm) gate opening for secure fast-action connections to ladders or anchors. Gate choices include the traditional Screw-Lock, or the easy-to-open-with-one-hand Auto-Lock. Both of the XL carabiner models have a removable stainless-steel keeper pin. Every carabiner is proof loaded.