ASAP ABSORBER Mobile fall-arrest device for rope. Stops a fall, a slide or uncontrolled descent. For use on a lifeline. Locks even if the device is grabbed during a fall. Works on vertical or angled rope. Moves up and down along the rope without manual intervention. Easy to install and remove at any point on the rope. May be used with an ASAP'SORBER energy absorbing lanyard to create the desired distance from the safety line. Comes with the OK TRIACT-LOCK automatic locking carabiner. Weight: 425 g (350 g for ASAP and 75 g for OK TRIACTLOCK).
PMI Classic static rope has been at the heart of mountaineering and caving worldwide for over 30 years. Extreme durability and substance you can rely on are what this rope is known for. Built to exacting Cordage Institute Life Safety Rope requirements, this rope features a hard-wearing 16-carrier nylon sheath and a static core design. PMI Classic Sport rope normally features an EZ-Bend Sheath, offering a fine balance between extraordinary abrasion-resistance and good knotability.
Comfortable harness for rope access. With an integrated CROLL ventral rope clamp, the AVAO BOD CROLL FAST harness was designed for greater comfort during rope ascents. The X-shaped dorsal construction wraps to reduce pressure points during prolonged suspension. The harness also facilitates carrying and organization of tools with multiple equipment loops and retainers for attaching CARITOOL tool holders and TOOLBAG tool-holder pouches. The AVAO BOD CROLL FAST harness has a specific construction that allows the user to hang from the dorsal attachment point for a longer time in case of a fall. Integrated CROLL ventral rope clamp for ascending ropes. Built for comfort: - X-shaped dorsal construction wraps to reduce pressure points during prolonged suspension; - semi-rigid, wide waistbelt and leg loops for excellent positioning; sculpted and lined with breathable perforated foam for comfort during suspension; - foam shoulder straps are widely spaced to reduce neck chafing; when the waistbelt is loaded, they help distribute this load over the shoulders; - hooking points for installing a PODIUM seat for use in prolonged suspension. Practical adjustment: - waistbelt and shoulder straps equipped with self-locking DoubleBack buckles for quick and easy adjustment; - leg loops equipped with FAST buckles for quick and easy opening and closing without the need to readjust them, even while wearing gloves; - fold-away side attachment points prevent accidental snagging. Facilitates carrying and organization of tools: - six pre-shaped equipment loops with protective sheath; - four CARITOOL tool holder retainers; - two slots for TOOLBAG tool pouch. Less traumatizing post-fall position: - in case of a fall on the dorsal attachment point, the load is distributed over the leg loops, allowing the user to remain suspended longer while awaiting rescue. The international version has a fall indicator: a red strap appears on the dorsal attachment point after a fall to indicate that the harness should be retired.
The AVAO BOD FAST fall arrest and work positioning harness is designed for greater comfort in all situations, both in the air and on the ground.
The X-shaped dorsal construction wraps to reduce pressure points during prolonged suspension. The harness also facilitates carrying and organization of tools with multiple equipment loops and retainers for attaching CARITOOL tool holders and TOOLBAG tool-holder pouches.
The AVAO BOD FAST harness has a specific construction that allows the user to hang from the dorsal attachment point for a longer time. In the case of a fall, the load is distributed through to the leg loops, lessening shock forces and assisting in preventing suspension trauma.
Carrying and Organization:
- A red strap appears on the dorsal attachment point after a fall to indicate that the harness should be retired.
NFPA 1983 class III, CSA Z259.10, ANSI Z359.1, CE EN 361, CE EN 358, CE EN 813, EAC
Nylon, polyester, aluminum, steel
PODIUM Podium seat designed for prolonged suspension. Wide, comfortable sitting position offers excellent stability. Rigid sides prevent the webbing straps from cutting into the thighs. Straps are adjustable with self-locking DoubleBack buckles. Three equipment loops. Easily positioned on the back when not in use.
VISIR Protective face shield for VERTEX and ALVEO helmets which allows for comfortable, versatile eye protection which is integrated into your high-performance helmet.
PIXA 3 Multi-beam headlamp adapted for close-range work, for moving around and for long-range vision. Complete and very durable, the PIXA 3 headlamp is the hands-free lighting solution that adapts to any situation encountered on the terrain: close-range work, moving around and long-range vision. Depending on the context, it may be worn on the head, mounted on the helmet, or placed on the ground. It provides constant, stable lighting performance. Headlamp keeps the hands free for work: may be worn on the head with the headband, mounted on a helmet, or placed on the ground. Mounting plate for helmets without headband (included). Three lighting modes: a mode adapted for close-range work with a wide, uniform beam, lighting to 15 meters for 12 hours (30 lumens); a mode adapted for movement containing a mixed beam with focused component allows user to move around comfortably, lights to 30 meters for 6 hours (40 lumens); and a mode adapted for long-range vision with a highly focused beam that lights to 55 meters for 3 hours (50 lumens). Constant lighting, guaranteed lighting performance that does not diminish during its entire lifetime. Reserve lighting when batteries are almost discharged: lights to 15 meters for a minimum of 10 hours. Easy to use, even when wearing gloves: three-mode rotating selector dial; lamp body can be oriented to direct the light according to need (rotation up to 45); and fast and easy battery change. Durable: excellent resistance to falls (2 m), to impacts and to crushing (80 kg); and storage position protects the glass and keeps headlamp from being turned on accidentally. Comfortable adjustable headband, easily detached for washing. Battery charge indicator: repetitive flasher and red light. Resistant to chemicals. Burn time can be doubled by using Lithium Ion batteries or rechargeable Ni-MH batteries.
Hand protection and finger dexterity at its best. This ultra-lightweight design is great for belaying, knot tying and other rigging work. It is not suitable hand protection for fast rope or other body rappel techniques. Key Features: Synthetic leather (palm base layer), Cowhide layer (finger wear points and palm), Ergonomically shaped for maximum protection and durability, Two-Way stretch spandex on top and fingers for greater mobility and breathability, Elastic cuff with pull-tab and Velcro closure, Carabiner loop stores inside for snag free operations.
Sold Out - $261.33
RIG Compact self-braking descender is designed for rope access and tactical insertion work (expert users only)
Its multi-functional handle allows the user to: unblock the rope and control the descent with the hand on the free end of the rope, and get into position without having to tie off the device. The automatic return system on the handle limits risks in case of an involuntary action by the user. Handle storage position reduces the risk of snagging when the descender is being carried on the harness. The safety gate on the moving side plate helps prevent dropping the device and facilitates installation of the rope when passing intermediate anchors. Pivoting cam facilitates taking up the slack in the rope.
Can also be used to make a reversible haul system, and for short ascents (in conjunction with a FOOTPRO foot loop and an ASCENSION handled rope clamp).
Lowers heavy loads up to 200 kg (only for expert users; consult the Instructions for use of the device)
The Volt is a fall arrest and work positioning harness that is very easily donned thanks to its EASYFIT design: a vest ensures the harness keeps its shape and the FAST automatic buckles on the waistbelt and leg loops allow the harness to be donned with both feet on the ground. The VOLT harness' anatomical design and wide, semi-rigid waistbelt ensure comfort throughout the work day.
For vertical progression with a rail or cable-based fall protection system, the LADDER CLIMB attachment point allows for ventral attachment of the trolley: it distributes the load on the waistbelt and thus ensures optimal efficiency and comfort during progression. In case of a fall, this attachment point automatically moves upward to a sternal position to ensure a vertical post-fall body position.
The VOLT WIND harness' anatomical design and wide, semi-rigid waistbelt ensure comfort throughout the work day. It has wear protectors on the waistbelt and below the dorsal point to limit wear when moving about inside the wind turbine tower.
Wide, semi-rigid waistbelt for excellent support, with lightweight, breathable construction for optimal comfort.
Stowage system for the MGO connectors on fall arrest lanyards, on each shoulder strap. In case of a fall, this system releases the MGO connectors and allows the absorber to be deployed.
Fall indicators on the sternal and dorsal attachment points. Their activation after a fall indicates that the harness must be retired.
The VOLT WIND harness also has dorsal wear protectors, to reduce wear on the straps when moving about inside a wind turbine tower.
Rapid donning thanks to the EASYFIT design:
- vest ensures the harness keeps its shape
- FAST automatic buckles on the waistbelt and leg loops allow the harness to be very easily donned, with both feet on the ground. These buckles retain their adjustment settings between donnings
Comfortable throughout the work day :
- anatomical design is close-fitting, while giving optimal freedom of movement.
- lightweight, breathable construction
- wide, semi-rigid waistbelt for excellent support
- for vertical progression with a rail or cable-based fall protection system, the LADDER CLIMB attachment point allows for ventral attachment of the trolley: it distributes the load on the waistbelt and thus ensures optimal efficiency and comfort during progression. In case of a fall, this attachment point automatically moves upward to a sternal position to ensure a vertical post-fall body position
- leg loop foam position can be adjusted for perfect positioning
- side slots allow a seat to be installed for greater comfort in prolonged suspension
Easy to use:
-waistbelt and shoulder straps equipped with self-locking DoubleBack buckles for quick and easy adjustment
-side attachment points can be folded down to prevent them snagging accidentally when not in use
-stowage system for the MGO connectors on fall arrest lanyards, on each shoulder strap.
-In case of a fall, this system releases the MGO connectors and allows the absorber to be deployed
-fall indicators on the sternal and dorsal attachment points If a fall indicator is visible after a fall, the harness must be retired
- equipment loops, slots for CARITOOL tool holder and TOOLBAG tool pouch allows easy organization of work tools
Multiple Attachment Points:
-LADDER CLIMB attachment point: for attaching the trolley of a rail or cable-based fall protection system
-Side attachment points: for attaching a positioning lanyard for use in double mode
-Sternal attachment point: for attaching a fall arrest system
-Dorsal attachment point: for attaching a fall arrest system
-Rear waistbelt attachment point: for attaching a restraint lanyard
Wind-Power Specific Design
-Dorsal wear protectors prevent wear on the straps when moving within tight spaces such as those found inside a wind turbine tower.
Certification(s): CE EN 361, CE EN 358, EAC, ANSI Z359.11, CSA Z259.10
Material(s): nylon, polyester, aluminum, steel
Guarantee: 3 years
The Volt harness comes in two configurations, one directed specifically at the wind-power industry. For more information on the Volt, follow this link:
Comfortable helmet for work at height and rescue
With its strong chinstrap, the VERTEX helmet sets the standard in head protection for workers at height. Its unventilated shell protects against electrical hazards and molten metal splash. Its six-point textile suspension ensures maximum comfort, and its CenterFit adjustment system adjusts the headband and keeps the helmet centered on the head. The VERTEX is designed for optimal attachment of a PIXA or ULTRA VARIO headlamp, a VIZIR, VIZIR SHADOW or VIZEN protective shield, and hearing protection.
|Product Size||10 mm||11 mm||12.5 mm||16 mm|
|25 L||110 m||85 m||65 m||53 m|
|35 L||160 m||120 m||92 m||75 m|