$24.23
The shape and size of this carabiner makes it great for most uses, from connecting a belay device to your harness or as a connector at the end of a lanyard. The D-shape makes it one of the strongest and lightest locking carabiners Petzl makes. Perfectly suited for use with belay devices due to its symmetric shape on both ends of the carabiner. In addition, the D-shape has the highest strength-to-weight ratio of all Petzl carabiner designs. This carabiner comes with Petzl's Keylock system.
Available with manual locking (SCREW-LOCK) gate or auto-locking systems (BALL-LOCK, TRIACT-LOCK).
Material: aluminum
Certifications: CE EN 362, CE EN 12275, type K (K and B for M34 SL), UIAA
$10.60 $10.60
Designed for setting up belays and other anchor points on rock faces, or as a quick anchor point in rescue operations.
Breaking strength 22 kN
$37.55
ASAP ABSORBER Mobile fall-arrest device for rope. Stops a fall, a slide or uncontrolled descent. For use on a lifeline. Locks even if the device is grabbed during a fall. Works on vertical or angled rope. Moves up and down along the rope without manual intervention. Easy to install and remove at any point on the rope. May be used with an ASAP'SORBER energy absorbing lanyard to create the desired distance from the safety line. Comes with the OK TRIACT-LOCK automatic locking carabiner. Weight: 425 g (350 g for ASAP and 75 g for OK TRIACTLOCK).
$54.89
The ASAP'SORBER lanyard connects to the ASAP or ASAP LOCK mobile fall arrester to help absorb the energy of a fall by the tearing of specifically-designed stitching. Combined with the ASAP LOCK, the lanyard allows the user to work at a distance from the rope in order to protect it during certain work phases such as grinding or cutting applications. The tearable energy absorber is located in a zippered fabric pouch to protect it from abrasion while still allowing for regular inspection. The ends of the lanyard are equipped with Petzl's STRING system to hold the connector in position and protect the webbing from abrasion.
This lanyard is available in two lengths (20 and 40 cm) for a choice of the best balance between distance from the rope and reducing the fall length.
Materials: nylon, polyester
Certifications: CE EN 355, EAC
*Guaranteed for 3 years
$125.74
Petzl's handled ascenders have been refined to provide greater comfort, efficiency, ease of use. The ergonomically shaped handle is over-molded with dual density grip for greater friction and better grip. The grip is wider at the bottom, providing better comfort for your pinkie fingers during use. The index finger indent has also been increased, offering greater efficiency when pulling on the ascender. The ergonomic trigger allows one-handed installation and removal. The two attachment points allow for different uses (e.g. self- belaying, hauling systems, etc.)
The geometry of the single piece aluminum frame ensures optimal handle orientation when the device is loaded and will maintain solid, comfortable performance for ascents of any length and the mono-frame construction eliminates weaknesses and keeps the ascender lightweight and durable for years of use.
The cam has been redesigned to minimize friction when sliding the ascender up the rope while the angled teeth provide secure grip in the worst of conditions (wet, icy, or muddy ropes).
Anodized frames are colour-coded for easy identification (except the tactical black versions). An added safety catch prevents the cam from opening too far, helping to keep the rope captured for added safety.
Materials: aluminum, stainless steel, plastic, rubber, nylon
Weight: 165 g
Rope compatibility: 8 to 13 mm
Certification(s): CE EN 567, CE EN 12841 type B, EAC, NFPA 1983 Technical Use
$643.41
Comfortable harness for rope access. With an integrated CROLL ventral rope clamp, the AVAO BOD CROLL FAST harness was designed for greater comfort during rope ascents. The X-shaped dorsal construction wraps to reduce pressure points during prolonged suspension. The harness also facilitates carrying and organization of tools with multiple equipment loops and retainers for attaching CARITOOL tool holders and TOOLBAG tool-holder pouches. The AVAO BOD CROLL FAST harness has a specific construction that allows the user to hang from the dorsal attachment point for a longer time in case of a fall. Integrated CROLL ventral rope clamp for ascending ropes. Built for comfort: - X-shaped dorsal construction wraps to reduce pressure points during prolonged suspension; - semi-rigid, wide waistbelt and leg loops for excellent positioning; sculpted and lined with breathable perforated foam for comfort during suspension; - foam shoulder straps are widely spaced to reduce neck chafing; when the waistbelt is loaded, they help distribute this load over the shoulders; - hooking points for installing a PODIUM seat for use in prolonged suspension. Practical adjustment: - waistbelt and shoulder straps equipped with self-locking DoubleBack buckles for quick and easy adjustment; - leg loops equipped with FAST buckles for quick and easy opening and closing without the need to readjust them, even while wearing gloves; - fold-away side attachment points prevent accidental snagging. Facilitates carrying and organization of tools: - six pre-shaped equipment loops with protective sheath; - four CARITOOL tool holder retainers; - two slots for TOOLBAG tool pouch. Less traumatizing post-fall position: - in case of a fall on the dorsal attachment point, the load is distributed over the leg loops, allowing the user to remain suspended longer while awaiting rescue. The international version has a fall indicator: a red strap appears on the dorsal attachment point after a fall to indicate that the harness should be retired.
$575.68 $575.68
The AVAO BOD FAST fall arrest and work positioning harness is designed for greater comfort in all situations, both in the air and on the ground.
The X-shaped dorsal construction wraps to reduce pressure points during prolonged suspension. The harness also facilitates carrying and organization of tools with multiple equipment loops and retainers for attaching CARITOOL tool holders and TOOLBAG tool-holder pouches.
The AVAO BOD FAST harness has a specific construction that allows the user to hang from the dorsal attachment point for a longer time. In the case of a fall, the load is distributed through to the leg loops, lessening shock forces and assisting in preventing suspension trauma.
Comfort:
Practical Adjustment:
Carrying and Organization:
Fall Indicator:
- A red strap appears on the dorsal attachment point after a fall to indicate that the harness should be retired.
Certifications:
NFPA 1983 class III, CSA Z259.10, ANSI Z359.1, CE EN 361, CE EN 358, CE EN 813, EAC
Materials:
Nylon, polyester, aluminum, steel
$333.78
BAG for NEST stretcher
$90.46
Product Size | 10 mm | 11 mm | 12.5 mm | 16 mm |
25 L | 110 m | 85 m | 65 m | 53 m |
35 L | 160 m | 120 m | 92 m | 75 m |
åÊ
åÊ
$11.56 $11.56
CARITOOL Tool holder. Tools accessed and organized with one hand. Flat top aids in sorting attached gear. Small hole on top for attaching keeper cord, to prevent dropping critical gear. Slips through the waistbelt slots or along the harness webbing and stays in place, thanks to its stabilizing clip.
$82.20
CONNEXION VARIO Adjustable anchor strap. Adjustment buckle allows strap to be adjusted between 80 and 130 cm. Forged steel D-rings on the ends. Breaking strength of 22 kN
$48.33
Lightweight belay/rappel gloves with natural, high-quality leather, durable double layer in high-wear areas, breathable stretch nylon across the back, neoprene cuffs with Velcro closure, and a carabiner hole for attachment to a harness
$60.28 $0.52
Lightweight belay/rappel gloves with natural, high-quality leather with reinforced palms, durable double layer in high-wear areas, durable leather with abraision-resistant stretch nylon at key flex areas, Neoprene cuffs with Velcro closure, and a carabiner hole for attachment to a harness
$91.87
CROLL Chest ascender. The CROLL chest ascender is unmatched for efficiency on fixed lines. Compact and lightweight, it does not interfere with progression. The stainless steel wear plate improves durability by reinforcing the rope friction zone. Used with a BASIC ascender or with an ASCENSION handled ascender for rope ascents. Toothed cam with self-cleaning slot optimizes performance under any conditions (e.g. frozen or dirty ropes). Stainless steel cam has better resistance to corrosion. Stainless steel wear plate for improved durability. Open the catch by pinching for simple, quick manipulation. Lower hole angled to keep the CROLL chest ascender flat. Upper hole for attaching a TORSE shoulder strap and keeping the ascender in position.
$14.47
DELTA Triangular steel quick link. When closed with a wrench, it becomes a semi-permanent anchor ring.
$15.43
DELTA Triangular steel quick link. When closed with a wrench, it becomes a semi-permanent anchor ring.
$137.48
GRIGRI 2 Belay device with assisted braking for 8.9 to 11 mm rope. The GRIGRI 2 belay device with assisted braking capability is designed to facilitate belay manoeuvers. The GRIGRI 2 works equally well for lead climbing and top-roping. It may be used on all single dynamic 8.9 to 11 mm ropes on the market (optimized for 9.4 mm to 10.3 mm ropes). Both compact and ultra-light, the GRIGRI 2 will accompany you on climbs around the world for many years. The GRIGRI 2 has a new design that allows excellent control during the descent. Belay technique identical to classic belay systems: both hands on the rope. A fall is stopped by tightening the hand on the free end of the rope. Assisted braking: during fall arrest, the belayer holds the free end of the rope, the cam pivots and pinches the rope, increasing the braking action until the rope stops sliding. The GRIGRI 2 has a new design that allows excellent control during the descent. One hand holds the rope and the other uses the handle to unlock the cam. The patented handle design allows a very gradual release of the rope. In combination with the strong braking action of the cam, it gives a great feeling of security when lowering a partner or rappelling. The GRIGRI 2 is compact and ultra-light at 185 g (25 % smaller and 20 % lighter than the GRIGRI). Built with a stainless steel friction plate and cam to ensure a long life for the product. For 8.9 to 11 mm single ropes (optimized for 9.4 mm to 10.3 mm ropes). Diagrams for rope installation engraved on belay device (interior and exterior).
Sold Out - $272.48 $272.48
The Grillon is an adjustable work positioning lanyard with Petzl's HOOK connector for attachment. The lanyard functions well with a fine adjustment system for precise work positioning.
When used in double mode, on the harness lateral attachment points, to distribute the weight between the belt and the user's feet, the length is adjusted by pressing on the pivoting cam.
The Grillon can also be used in single mode, on the harness ventral attachment point, to distribute weight between the waistbelt and the leg loops so the user is suspended, the length is adjusted by operating the handle while holding the free end of the lanyard.
Removable protective sheath protects the rope from abrasive surfaces and allows smooth rope glide (it is necessary to open the device to remove the protective sheath).
Available in 2m, 3m, 4m and 5m lengths.
Certification: CE EN 358
$116.06 $116.06
Replacement lanyard for the Grillon Hook
$241.85 $241.85
Temporary horizontal lifeline. Allows a horizontal lifeline to be installed quickly when there is a large work surface. The self-jamming device allows easy adjustment of the length and tension between the two anchor points (make a mule knot on the GRILLON to lock the anchor). Semi-static rope, resistant to aging and abrasion. Sewn terminations on both ends with plastic sheath to keep the connector in position and protect the rope from abrasion.
$314.42
The Grillon MGO is an adjustable work positioning lanyard with Petzl's MGO large opening connector for attachment. The lanyard functions well with a fine adjustment system for precise work positioning.
When used in double mode, on the harness lateral attachment points, to distribute the weight between the belt and the user's feet, the length is adjusted by pressing on the pivoting cam.
The Grillon can also be used in single mode, on the harness ventral attachment point, to distribute weight between the waistbelt and the leg loops so the user is suspended, the length is adjusted by operating the handle while holding the free end of the lanyard.
Certification(s): CE EN 358, EAC
$159.61
GRILLON MGO Replacement Lanyard, 3 m [Petzl]
$82.20 $82.20
$367.64 $367.64
I'D Self braking descender with antipanic function. Multi-functional handle allows the user to: unblock the rope and control the descent with the hand on the free end of the rope; move more easily on horizontal or low-angle terrain, thanks to the button on the handle; and get into position without having to tie off the device. Anti-panic function is engaged if the user pulls too strongly on the handle : brakes and stops the descent automatically. Anti-error safety catch to reduce the risk of an accident due to incorrect installation of the device on the rope. The shape of the cam is designed to improve rope glide when ascending. The safety gate on the moving side plate helps prevent dropping the device and facilitates installation of the rope when passing intermediate anchors. Pivoting cam facilitates taking up the slack in the rope. Can also be used to make a reversible haul system, and for short ascents (in conjunction with a FOOTPRO foot loop and an ASCENSION handled rope clamp). The I'D L only is designed for rescue operations. Lowers heavy loads up to 250 kg for I'D S and 272 kg for I'D L (only for expert users; consult the Instructions for Use for the device).