Energy absorber for ASAP or ASAP LOCK
The ASAP’SORBER energy absorber may only be used with an ASAP or ASAP LOCK mobile fall arrester. It allows user to work at a distance from the rope, in order to protect it during certain work phases. Equipped with tear-webbing inside a pouch that opens on each end, the absorber is protected from abrasion, while allowing for regular inspection. It is available in two lengths, to provide the best balance between distance from the rope and reduced fall length.
Adjustable work positioning lanyard with HOOK connector (International Version)
The GRILLON HOOK adjustable lanyard is used to make work positioning systems, to complement a fall-arrest system. Its length can be very easily and precisely adjusted as necessary for comfortable positioning at the work station. Its HOOK connector is ideal for using the lanyard in double mode on the harness side attachment points. GRILLON HOOK is available in four lengths (2, 3, 4 and 5 m) and is certified to North American and European standards.
The Grillon MGO is an adjustable work positioning lanyard with Petzl's MGO large opening connector for attachment. The lanyard functions well with a fine adjustment system for precise work positioning.
When used in double mode, on the harness lateral attachment points, to distribute the weight between the belt and the user's feet, the length is adjusted by pressing on the pivoting cam.
The Grillon can also be used in single mode, on the harness ventral attachment point, to distribute weight between the waistbelt and the leg loops so the user is suspended, the length is adjusted by operating the handle while holding the free end of the lanyard.
Certification(s): CE EN 358, EAC
Temporary horizontal lifeline. Allows a horizontal lifeline to be installed quickly when there is a large work surface. The self-jamming device allows easy adjustment of the length and tension between the two anchor points (make a mule knot on the GRILLON to lock the anchor). Semi-static rope, resistant to aging and abrasion. Sewn terminations on both ends with plastic sheath to keep the connector in position and protect the rope from abrasion.
Sold Out - $420.54
The JAG SYSTEM haul kit for pickoffs, making a releasable anchor or tensioning a system, thanks to its 4:1 mechanical advantage and excellent efficiency (sheaves with sealed ball bearings). The collapsed kit is highly compact, allowing it to be used even when the distance to the anchor is very short. The JAG SYSTEM haul kit is quick and easy to deploy: it is ready to use thanks to the flexible cover that prevents any risk of tangling. The haul end is colour-coded for instant identification. It is available in three lengths: 1, 2 and 5 meters.
GRIGRI 2 Belay device with assisted braking for 8.9 to 11 mm rope. The GRIGRI 2 belay device with assisted braking capability is designed to facilitate belay manoeuvers. The GRIGRI 2 works equally well for lead climbing and top-roping. It may be used on all single dynamic 8.9 to 11 mm ropes on the market (optimized for 9.4 mm to 10.3 mm ropes). Both compact and ultra-light, the GRIGRI 2 will accompany you on climbs around the world for many years. The GRIGRI 2 has a new design that allows excellent control during the descent. Belay technique identical to classic belay systems: both hands on the rope. A fall is stopped by tightening the hand on the free end of the rope. Assisted braking: during fall arrest, the belayer holds the free end of the rope, the cam pivots and pinches the rope, increasing the braking action until the rope stops sliding. The GRIGRI 2 has a new design that allows excellent control during the descent. One hand holds the rope and the other uses the handle to unlock the cam. The patented handle design allows a very gradual release of the rope. In combination with the strong braking action of the cam, it gives a great feeling of security when lowering a partner or rappelling. The GRIGRI 2 is compact and ultra-light at 185 g (25 % smaller and 20 % lighter than the GRIGRI). Built with a stainless steel friction plate and cam to ensure a long life for the product. For 8.9 to 11 mm single ropes (optimized for 9.4 mm to 10.3 mm ropes). Diagrams for rope installation engraved on belay device (interior and exterior).
The Volt is a fall arrest and work positioning harness that is very easily donned thanks to its EASYFIT design: a vest ensures the harness keeps its shape and the FAST automatic buckles on the waistbelt and leg loops allow the harness to be donned with both feet on the ground. The VOLT harness' anatomical design and wide, semi-rigid waistbelt ensure comfort throughout the work day.