GRIGRI 2 Belay device with assisted braking for 8.9 to 11 mm rope. The GRIGRI 2 belay device with assisted braking capability is designed to facilitate belay manoeuvers. The GRIGRI 2 works equally well for lead climbing and top-roping. It may be used on all single dynamic 8.9 to 11 mm ropes on the market (optimized for 9.4 mm to 10.3 mm ropes). Both compact and ultra-light, the GRIGRI 2 will accompany you on climbs around the world for many years. The GRIGRI 2 has a new design that allows excellent control during the descent. Belay technique identical to classic belay systems: both hands on the rope. A fall is stopped by tightening the hand on the free end of the rope. Assisted braking: during fall arrest, the belayer holds the free end of the rope, the cam pivots and pinches the rope, increasing the braking action until the rope stops sliding. The GRIGRI 2 has a new design that allows excellent control during the descent. One hand holds the rope and the other uses the handle to unlock the cam. The patented handle design allows a very gradual release of the rope. In combination with the strong braking action of the cam, it gives a great feeling of security when lowering a partner or rappelling. The GRIGRI 2 is compact and ultra-light at 185 g (25 % smaller and 20 % lighter than the GRIGRI). Built with a stainless steel friction plate and cam to ensure a long life for the product. For 8.9 to 11 mm single ropes (optimized for 9.4 mm to 10.3 mm ropes). Diagrams for rope installation engraved on belay device (interior and exterior).
The shape and size of this carabiner makes it great for most uses, from connecting a belay device to your harness or as a connector at the end of a lanyard. The D-shape makes it one of the strongest and lightest locking carabiners Petzl makes. Perfectly suited for use with belay devices due to its symmetric shape on both ends of the carabiner. In addition, the D-shape has the highest strength-to-weight ratio of all Petzl carabiner designs. This carabiner comes with Petzl's Keylock system.
Available with manual locking (SCREW-LOCK) gate or auto-locking systems (BALL-LOCK, TRIACT-LOCK).
Certifications: CE EN 362, CE EN 12275, type K (K and B for M34 SL), UIAA
Designed for setting up belays and other anchor points on rock faces, or as a quick anchor point in rescue operations.
ASAP ABSORBER Mobile fall-arrest device for rope. Stops a fall, a slide or uncontrolled descent. For use on a lifeline. Locks even if the device is grabbed during a fall. Works on vertical or angled rope. Moves up and down along the rope without manual intervention. Easy to install and remove at any point on the rope. May be used with an ASAP'SORBER energy absorbing lanyard to create the desired distance from the safety line. Comes with the OK TRIACT-LOCK automatic locking carabiner. Weight: 425 g (350 g for ASAP and 75 g for OK TRIACTLOCK).