Tri-Pods / Davit Arms

Advanced 5-Piece Davit Hoist System - Sala

$6,243.25

8300009 - 5-piece davit hoist system with 8518001 11-1/2 in. to 27-1/2 in. (29.2 to 69.8 cm) adjustable offset davit mast, 8518002 33 in. (83.8 cm) lower davit mast extension and 8518005 3-piece portable base.

PRODUCT HIGHLIGHTS

• 5-piece davit hoist system
• Integrated 5,000 lb. (22 kN) mast anchorage point
• Fall arrest rated in all davit offset mast positions
• Adjustable vertical height of 33 in. to 43 in. (83.8 to 109.2 cm)
• Telescoping reach of 11-1/2 in. to 27-1/2 in. (29.2 to 69.8 cm)
• Adjustable offset upper davit mast (model 8518001)
• Built-in primary and secondary pulleys
• Quick mount winch/SRL bracket
• Detent and knob style adjustment
• 33 in. (83.8 cm) lower davit mast extension (model 8518002)
• Combine up to 2 extensions
• Extends your davit mast height
• 3-piece adjustable portable base (model 8518005)
• Base width adjusts from 37 in. to 64 in. (94 to 162.6 cm)
• Unique foot level and height adjustment system
• Lightweight, corrosion-resistant aluminum construction

Advanced Aluminum Tripod - Sala

$1,454.82

When it comes to confined space entry/rescue, it is essential that equipment operates perfectly and quickly.

DBI-SALA® has an extensive line of rescue and retrieval systems with decades of proven field service. Safety engineers and site directors trust DBI-SALA® for the type of high quality, rugged systems that will ensure top performance when it is needed the most.

Their aluminum tripods are extremely lightweight and portable, easily set-up by one worker and can be transported from one location to another.

Ideal for confined space entry and emergency rescue applications, they can accommodate a variety of winches and fall arrest devices.

Sala tripods are loaded with features such as locking legs, simple detent pin style adjustment, quick-mount mechanical device bracket, safety chain to prevent movement and safety shoes that incorporate a rubber sole for flat surfaces and spiked edges for slippery surfaces.

Advanced Tank Pod System [DBI-Sala]

$8,217.00

We had a customer who needed to enter a fermenting vessel for inspections and potential repairs from above.  To be clearer, they didn't need to enter one vessel, they needed to enter each of their 165 vessels. The problem was, the tanks were within 3 feet of the ceiling and there was only smooth concrete above the hatches which the owner didn't want to drill into so simple anchor solutions were out.

This is not a unique story.  We get requests like these all of the time.  Often the solution is to modify the overhead structures to place anchors but isn't always feasible and, in some cases. individual permanent anchors that have to be inspected and certified become more expensive than can be absorbed.

Enter the Advanced Tank Pod System from Capital Safety to help us solve these issues.

When you have minimal overhead clearance, when you need to need a solution that lets you work on the top of a tank or if you need to protect the structure you are working in, this is the tool for the job.  Not only that, if you don't have a stable platform that is large enough to accommodate a davit or tripod adjacent to the hatch entry, why not work directly on top of the tank instead?

In the case of our brew tank customer, they chose to connect a 50' SRL and a 100' winch to the tank pod which let them not only access the tank safely and under control but it also allowed them to have redundancy in the case of any issues with either fall protection system.

The Top 3 reasons the Tank Pod System is a good one to consider for your job site?

Advanced UCT-300 Aluminum Tripod - Sala

Sold Out - $2,405.54

UCT-300 aluminum tripod with adjustable locking legs, safety chain, safety shoes, top pulley and quick-mount bracket.

PRODUCT HIGHLIGHTS

• UCT-300 aluminum tripod
• Telescoping adjustable locking legs
• Built-in pulley system - can accommodate up to three pulleys
• Rubber safety shoes with spiked edges
• Safety leg support chain
• Integrated 5,000 lb. (22 kN) anchor points
• Quick connect winch/SRL mount bracket
• Order mechanical winch/SRL device(s) separately

Certifications:

ANSI Z117.1-1995, OSHA 1910.66, OSHA 1910.146, OSHA 1926.502, Capital Safety Gen. Mfg. Req.

Basic SKED Stretcher System w/ Cobra Buckles - Orange, Skedco

$1,089.21

The original and still the best solution for confined space, high angle or technical rescue, and traditional land based applications, the Sked stretcher is a revolutionary design which provides outstanding patient protection and security.

Skedco now has the Austrian made Skedco/Cobra side release buckles that are dependable and strong enough to meet the needs of securing a patient into a Sked stretcher without the danger of breakage. These buckles are rated at 3,000 pounds. They are durable and easy to use. When they are under tension they are very hard to release thus accidental release under tension is not an issue. With these buckles, you will no longer have to weave the webbing through the original steel buckles when packaging a patient. Patient packaging is often done in about half of the time as when using the original steel buckles.

The Sked comes equipped for horizontal hoisting by helicopter or vertical hoisting in caves or industrial confined spaces. When the patient is packaged the stretcher becomes rigid. The durable plastic provides protection for the patient while allowing extrication through the most demanding confined spaces.

The SK-200 Sked Basic Rescue System comes with:

• SK-201C-OR The Sked Stretcher with Cobra Buckles
• SK-202 Cordura backpack
• SK-203 Horizontal Lift Slings (pair)
• SK-204 Sked Tow Strap
• SK-205 Removable Webbing Handles
• SK-206 Steel Locking 'D' Carabiner
• SK-207 Sked Vertical Lift Sling

The stretcher is rolled for storage in a tough Cordura backpack which is included with the system. The Sked storage bag is 36 inches (91 cm) long by 9 inches (23 cm) in diameter and ships at 18 lbs, complete for most applications.

Available in International Orange or Olive Drab Green.

NSN Number (SK-200C-OR):

6530-01-575-4004

User Manual Download:

https://skedco.com/wp-content/uploads/2016/10/NEW-SKED-INSTRUCTION-Standard-Size.pdf

Foot Replacement Kit for TerrAdaptor - SMC

$120.41

Key Features: Ball Foot; Hobble Plate with Quick Link Basket; Leg Coupling Pin.

Load Locking Head Pin for TerrAdaptor - SMC

$15.85

Entirely unique to the TerrAdaptor is the ability to adjust the head angle in multiple directions. This allows the head to remain level even when the terrain is not.

Main Attachment Pin for TerrAdaptor - SMC

$35.19

The main load bearing attachment point on the TerrAdaptor is a two position yoke located at the bottom of the main head. Items are attached to the head with the use of the Main Attachment Pin, which is a quick release ball lock pin.

Replacement Pins for Skedco Tripod SK700 - Skedco

$22.37

SKEDCO Sked-Evac Tripod Storage Bag - Skedco

$144.62

Vinyl transport bag for storing and carrying your SKED-EVAC Tripod (SK-700). Features heavy duty vinyl coated nylon material and an extra long zipper along it's full length and across it's ends to facilitate easy repackaging. It has a pocket inside in the center to store the bag of chain which comes with the tripod, preventing the chain from sliding to one end when the tripod is carried. There are handles in the center and on each end of the bag. This bag has a 9"" diameter and a 7'1" length, and will make nearly any brand of tripod easier to carry. Made in USA.

SKEDCO Sked-Evac Tripod, 10 ft - Skedco

$2,163.28

The Sked-Evac Tripod extends to ten feet high at the three anchors which are available to clip into.

Each of the anchors is anodized red for easy identification, and all are equally well centred to handle a load.

The anchors, header and legs are interconnected with stainless steel bolts to provide maximum strength. The header limits the distance the legs can spread. When at the full extension this tripod allows you to bring the patient in a stretcher completely out of the hole.

It is rated to handle an NFPA rescue load and has EN795 certification as well.

Included with the tripod is a chain which passes through the feet to provide greater strength and stability. The chain will not degrade in acids or chemicals like nylon straps or ropes.

The legs are adjustable in 5" increments, and Skedco provides safe working load data for each tripod height on each tripod.

Measurement:

When Sked-Evac Tripod is fully extended, the length of each tripod leg is 135 3/4″ long (11′ 3 3/4″). And the Diameter is about 108” (9’).

Shipping Dimensions:

9" x 9" x 90" at 70lbs

Product Manual Download:

https://skedco.com/wp-content/uploads/2015/02/Tripod-Instruction.pdf

Brackets are available for mounting most popular winches.

Made in USA.

Disclaimer: Skedco strongly recommends against attaching “change of direction” pulleys to the feet or legs of the Sked-Evac or any other tripod as pulling laterally against unsecured tripod legs is dangerous and could lead to injury or death.

TerrAdaptor Bolt Replacement Kit - SMC

$7.70

Key Features: 4 SHCS Alloy Bolts; 4 Nylok Nuts.

TerrAdaptor Gin Pole Kit - SMC

$1,284.70

Key Features: 2 Lash Ring with Coupling Pins; Leg kit complete with Ball Foot, Hobble Plate & Basket.

TerrAdaptor Head/Accessory Bag - SMC

$423.73

TerrAdaptor Head/Accessory Bag [SMC]

TerrAdaptor Lash Ring Kit - SMC

$83.37

The TerrAdaptor Lash Ring is designed to provide multiple attach points for stabilizing the tripod. Each TerrAdaptor tripod comes with 2 lash rings and additional accessory lash rings are available for purchase, if desired. Lash rings can be installed in any position, in any quantity and in any orientation along the perf tubes (small diameter leg). For lighter loads, especially in a MonoPod configuration, the lash ring may serve as an auxiliary main attachment point.

TerrAdaptor Leg Bag - SMC

$409.49

TerrAdaptor Leg Bag [SMC]

TerrAdaptor Orange Mid-Tube Leg Extension - SMC

$258.31

The Orange Mid-Tube is the part youÌÎÌ__ÌÎÌ__’?äóÁÌÎ?ÌÎÌÕ?ÌÎÌ___ÌÎÌ__?ÌÎÌ__ÌÎÌ_ÌÎÌÊ_‰ۡóÁÌ_åÈ?ÌÎÌ__ÌÎÌ_ÌÎÌÊÌÎÌ____‰ۡóÁÌ_åÈÌÎÌ_ÌÎÌ_ÌÎÌ__ÌÎÌ_ÌÎÌÊÌÎÌ___ll need to extend the lazy leg of the TerrAdaptor to maximize its length. You will also need additional Leg Coupling Pins (SM230301). Length: 48.00"", Width: 2.50"" (6.4 cm).

TerrAdaptor Quadpod Attachment System - SMC

$1,858.72

Key Features: Quadpod Head Attachment; Leg kit complete with Ball Foot, Hobble Plate & Basket, Center Leg Clamp with 3 Load Locking Pins each, Main Attachment Pin, Rope Hobble Section.

TerrAdaptor QuickLash - PMI

$68.34

The TerrAdaptor QuickLash has been designed to work exclusively on the TerrAdaptor grey tube as an anchor point. With the QuickLash, TerrAdaptor users will now be able to install an auxiliary anchor point before, during or after set up. Simply connect the QuickLash by inserting the quick release pin and you have a high strength single or multi direction tieback. This new QuickLash is ideal for attaching pulleys or other gear to assist with tie backs, redirects, and/or tie downs. Quick, easy and high strength make this TerrAdaptor accessory a must have for all rescue teams who have come to love the TerrAdaptor. Key Features: Attach to grey tubes before, during or after setting up TerrAdaptor; Connection point for single or multi direction tieback; Can be attached inside of leg and used to tie TerrAdaptor down for stability; Can be used as attachment point for hanging pulleys or other gear; Can be attached at the foot connection point; 30 kN strength when loaded straight along major axis; 15 kN when strength when pulled to side at 90 degrees. Color: Gold. MBS: 30 kN (6744 lbf). Weight: 0 lbs 4.2 oz (118 g). Length: 4.42"" (11.2 cm). Width: 2.94"" (7.5 cm). Height: 0.75"" (1.9 cm). Major Axis: 30 kN (6744 lbf). Minor Axis: 15 kN (3372 lbf). Material: Anodized Aluminum.

TerrAdaptor QuickLash - PMI

$54.67

The TerrAdaptor QuickLash has been designed to work exclusively on the TerrAdaptor grey tube as an anchor point. With the QuickLash, TerrAdaptor users will now be able to install an auxiliary anchor point before, during or after set up. Simply connect the QuickLash by inserting the quick release pin and you have a high strength single or multi direction tieback. This new QuickLash is ideal for attaching pulleys or other gear to assist with tie backs, redirects, and/or tie downs. Quick, easy and high strength make this TerrAdaptor accessory a must have for all rescue teams who have come to love the TerrAdaptor. Key Features: Attach to grey tubes before, during or after setting up TerrAdaptor; Connection point for single or multi direction tieback; Can be attached inside of leg and used to tie TerrAdaptor down for stability; Can be used as attachment point for hanging pulleys or other gear; Can be attached at the foot connection point; 30 kN strength when loaded straight along major axis; 15 kN when strength when pulled to side at 90 degrees. Color: Gold. MBS: 30 kN (6744 lbf). Weight: 0 lbs 4.2 oz (118 g). Length: 4.42"" (11.2 cm). Width: 2.94"" (7.5 cm). Height: 0.75"" (1.9 cm). Major Axis: 30 kN (6744 lbf). Minor Axis: 15 kN (3372 lbf). Material: Anodized Aluminum.

TerrAdaptor Tripod System - SMC

$6,314.19

The TerrAdaptor system has been tested extensively in both lab and field environments.

As a result, the TerrAdaptor Portable Anchor system in the standard symmetric tripod and quadpod configurations are the only systems of their kind to be certified by UL to NFPA 1983 (2006 ed.)

Symmetric Tripods are typically used for straight vertical access such as above manholes or access hatches. When straddling a manhole or access hatch, a symmetric tripod's feet are equal distance from the center of the manhole or hatch. All three legs are equally loaded. This is most often the strongest tripod configuration.

System Components MBS: 36 kN (8,093 lbf).

The TerrAdaptor Tripod System includes:

• TerrAdaptor Tripod Head
• 2 Offset Leg Clamps with 3 Load Locking Pins each
• Main Attachment Pin
• 3 Legs Kits complete with Feet, Hobble Plates & Baskets
• Center Leg Clamp with 3 Load Locking Pins each
• 3 Rope Hobble Sections
• Cotter Pin Kit
• Leg Coupling Pin
• 2 Lash Ring with 1 Coupling Pin each
• TerrAdaptor Head/ Accessory Bag
• 2 TerrAdaptor Leg Bag
• TerrAdaptor User Guide