Tango TX1 Gas Detector [Industrial Scientific]

Notify me when this product is available:


The Tango® TX1, with a 2-year run time and DualSense® Technology, increases worker safety, regardless of bump test frequency, while reducing overall costs.

  • DualSense Technology  increases worker safety by using two 
    sensors to detect the same gas
  • Guaranteed for Life™ with replaceable sensors and batteries that 
    extend the life of the instrument 
  • Optional AlarmAmp™ increases audible alarms to 110dB
  • Acknowledgeable gas alerts

    • By wearing the Tango® TX1 Portable gas detector, your workers will be the safest single gas monitor users in the world. A 2-year run time and patented DualSense Technology increase worker safety, regardless of bump test frequency, while reducing overall costs. 

       

      • Significantly increases worker safety - DualSense Technology ensures that, regardless of your current bump test policy, you will be significantly safer with the Tango than with any other single gas instrument on the market today. *  
      • Longer battery life - Operates continuously in an "always-on" mode for two years. After the battery can no longer support instrument life, it can be replaced for another two years of continuous operation.
      • Louder instrument alarm - Alarms at 100dB at 10 centimeters making it twice the volume of Industrial Scientific's GasBadge units and louder than any single gas instrument on the market. Alarm volume can be increased by about 10dB for higher-noise environments with the addition of the optional AlarmAmp™.
       

      *Based on iNet® data including more than 2 million bump tests and 100,000 unique sensors. 

    • SPECIFICATIONS

      INSTRUMENT WARRANTY:

      Guaranteed for Life™. Warranted for as long as the instrument is supported by Industrial Scientific Corporation (excludes sensors, batteries, and filters). CO and H2S sensors are warranted for 3 years. All other sensors are warranted for 2 years.

      DISPLAY:

      Segment liquid crystal display (LCD)

      KEYPAD:

      Two buttons

      CASE MATERIALS:

      Case top: Polycarbonate with a protective rubber overmold

      Case bottom: Conductive polycarbonate

      ALARMS:

      Three strobe-emitting visual alarm LEDs (two red; one blue);

      100 decibel (dB) audible alarm at a distance of 10 cm (3.94"); Vibration alarm

      DIMENSIONS:

      99 x 51 x 35 mm (3.9" x 2.0" x 1.4")

      WEIGHT:

      126.0 g (4.4 oz.)

      TEMPERATURE RANGE:

      -40°C to +50°C (-40°F to +122°F)

      HUMIDITY RANGE:

      15%-95% Non-condensing (continuous)

      SENSORS:

      CO, CO/H2, H2S, NO2, SO2 - Electrochemical sensor technology

      SENSOR MEASURING RANGES:

      Carbon Monoxide (CO): 1 to 1,000 ppm in 1 ppm increments

      Carbon Monoxide (CO/H2 low): 0.0 to 1,000.0 ppm in 1 ppm increments

      Hydrogen Sulfide (H2S): 0.0 to 500.0 ppm in 0.1 ppm increments

      Nitrogen Dioxide (NO2): 0.0 to 150.0 ppm in 0.1 ppm increments

      Sulfur Dioxide (SO2): 0.0 to 150.0 ppm in 0.1 ppm increments

      BATTERY:

      3.6 V Primary lithium-thionyl chloride (Li-SOCl2); 1.5AH, 2/3AA; replaceable; 
      non rechargeable; always on; up to 2-year run time depending on operating conditions

      DATA LOGGING:

      3 months at 10-second intervals

      EVENT LOGGING:

      60 alarm events

      CERTIFICATIONS

      INGRESS PROTECTION:

      IP66; IP67

      -40°C TO +50°C (-40°F TO +122°F)

      ATEX

      Ex ia I Ma; Ex ia IIC T4 Ga;

      Equipment Group and Category: I M1 and II 1G

      CSA

      Class I, Groups A B C D T4; Ex ia IIC T4

      IECEx

      Ex ia I Ma; Ex ia IIC T4 Ga

      UL (C-US)

      Class I, Groups A B C D T4; Class II, Groups E F G;

      Class I, Zone 0, AEx ia IIC T4

      INMETRO

      Ex ia I Ma; Ex ia IIC T4 Ga

      -20°C TO +50°C (-4°F TO +122°F)

      China Ex

      Ex ia IIC T4 Ga

      CMA

      Ex ia I Ma; H2S, CO

      KC

      Ex ia IIC T4

      EAC

      PO Ex ia I X; 0 Ex iX IIC T4 X

       

        

      These specifications are based on performance averages and may vary by instrument.